[Skimmertalk] No visible callsign list in CW Skimmer ?

[Andrew O'Brien]

Got it

CallsDialogLeft=1
CallsDialogTop=2

worked but not

CallsDialogLeft=0
CallsDialogTop=0

Thanks

On Fri, Nov 24, 2017 at 10:54 AM, Andrew O'Brien <k3ukandy at gmail.com> wrote:

> Interesting , I did change the ini file to
> CallsDialogLeft=0
> CallsDialogTop=0
>
> My INI file had more precise position instructions.   However, still no
> viewable callsign list.  The ini file changed from the LEFT/RIGHT = 0    to
> now
>
> CallsDialogWidth=259
> CallsDialogHeight=631
> CallsDialogVisible=1
>
> I'll poke around some more...
>
> Andy
>
> On Thu, Nov 23, 2017 at 11:20 PM, Andrew O'Brien <k3ukandy at gmail.com>
> wrote:
>
>> Thanks, I only have one monitor BUT used to have two.  I'll change the
>> ini file and see if that fixes things
>>
>> Andy
>>
>>
>> On Thu, Nov 23, 2017 at 9:23 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>>
>>> Perhaps I misunderstood your question. If you toggle *View* -> *Callsign
>>> list* in the CW Skimmer menu, you should see a window open and close.
>>> Perhaps it has moved to the left or right edge of the screen or to a second
>>> monitor, and you're having trouble seeing it.
>>>
>>> If you still can't find it, select *Help* -> *Data Folder*.   Edit
>>> *CwSkimmer.ini*.  Exit from CW Skimmer.  In the CwSkimmer.ini file,
>>> look for these lines and change them to:
>>>
>>> CallsDialogLeft=0
>>> CallsDialogTop=0
>>>
>>> Save the change to the .ini file and restart CW Skimmer.  The callsign
>>> Windows should now be quite visible.
>>>
>>> 73,
>>> Bob, N6TV
>>>
>>> On Thu, Nov 23, 2017 at 9:10 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>>>
>>>> From the CW Skimmer menu, select *Commands* -> *BLIND Mode*, and make
>>>> sure that it is NOT checked.
>>>>
>>>> BLIND mode was created for folks who are operating a contest in the
>>>> "Unassisted" category, where using a waterfall display is OK as long as no
>>>> automatically decoded callsigns are displayed.
>>>>
>>>> 73,
>>>> Bob, N6TV
>>>>
>>>> On Thu, Nov 23, 2017 at 8:18 PM, Andrew O'Brien <k3ukandy at gmail.com>
>>>> wrote:
>>>>
>>>>> I am no longer able to see the callsign list in CW Skimmer, everything
>>>>> else
>>>>> is working as expected.  I checked for hidden windows , examined the
>>>>> task
>>>>> view etc, but no sign of it.  I am using a fresh install of CS Skimmer
>>>>> 2.0
>>>>> .  Callsigns ARE being received and displayed on the right side panel ,
>>>>> just not in the usual list.   Running Windows 10 .  Any suggestions ?
>>>>>
>>>>> Andy K3UK
>>>>> _______________________________________________
>>>>> Skimmertalk mailing list
>>>>> Skimmertalk at contesting.com
>>>>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>>>>
>>>>
>>>>
>>>
>>
>