[Skimmertalk] Two Red Pitaya receivers on same network are getting confused with each other

[dd5xx at web.de]

Hi Wes,
 
if I understood correctly according https://github.com/HrochL/CWSL/blob/master/README.md you have to run CWSL_TEE and CW SkimSrv on the same machine, see here:
 
[...]
CWSL is a set of utilities to allow further use of data from SDR receiver connected to the Skimmer server[http://www.dxatlas.com/SkimServer/]. This is done through the special dll CWSL_Tee, whitch acts as driver for another SDR receiver. It is inserted between the real driver of SDR receiver and Skimmer server. Data from the SDR receiver going through this library, which is storing it in circular buffers in shared memory of the computer. All other applications running on the same computer can use it from these buffers.
[...]
 
best 73
Saki, DD5XX
 

Gesendet: Samstag, 14. Oktober 2017 um 19:16 Uhr
Von: "Wes Cosand" <wes.cosand at gmail.com>
An: skimmertalk <skimmertalk at contesting.com>
Betreff: [Skimmertalk] Two Red Pitaya receivers on same network are getting confused with each other
I installed a second RP and there is something fundamental I do not
understand.

The two instances of CW SkimServer are running on different machines.
Where does Skimmer Server or CWSL_Tee get the IP address to distinguish one
receiver from another? I added Bob's script to start Pavel's receiver on
each Red Pitaya automatically.

I am in "over my head".

Wes WZ7I
_______________________________________________
Skimmertalk mailing list
Skimmertalk at contesting.com
http://dayton.contesting.com/mailman/listinfo/skimmertalk[http://dayton.contesting.com/mailman/listinfo/skimmertalk]