[Skimmertalk] RedPitaya LED´s

[Bob Wilson, N6TV]

It takes a minute or so to boot up and acquire an IP address from the
Router.  Maybe the Router was down?

For troubleshooting, you can use the direct "Console" connection from
Windows via a virtual serial port, but you need a separate USB to mini-USB
cable and the FTDI driver (installed automatically by recent versions of
Windows).

Details and connection diagram here:

http://redpitaya.readthedocs.io/en/latest/developerGuide/os/console/console.html

In sum, connect Putty to COMx at 115200 baud, N, 8, 1 (get COM port number
from Windows Device Driver).  RP boot messages will scroll by pretty fast,
errors in red.  You can redisplay them with the command:  *dmesg*.

73,
Bob, N6TV

On Tue, Sep 5, 2017 at 4:43 AM, Jorge Diez - CX6VM <cx6vm.jorge at gmail.com>
wrote:

> Hello
>
> today I turned on my RP and was not working.
>
> I noticed that started with blue and green leds and then remained on green,
> orange and yellow
>
> I turned it off and on, start over and remained on green and yellow leds
>
> After several times turning it off and on, finally blue and green on and
> orange blinking and Skimmer working
>
> What may have been the problem?
>
> thanks,
> Jorge
> CX6VM/CW5W
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>