[Skimmertalk] CWSL_TEE with HDSDR on QS1R

[Jeff Blaine]

I am trying to get two bands showing and the HDSDR with collapse option 
does that.  However on the HD display (1080) the height of the HDSDR 
window cannot be shrunk enough to allow the two "panafall" windows to be 
seen without overlap.  There seems to be a limit as to how short it can 
be - and that limit is about 60% of the display height.

Anyone know of a way to further shrink the HDSDR window?

Or (as an alternative) is there a way to use the PowerSDR OPENSDR 
application (for Anan, Hermes, etc) with CWSL_TEE?

73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com

On 02-Nov-18 1:55 PM, Jeff Blaine wrote:
> Thanks for the tip Bob.  It was in fact the IPP70 dll that were the 
> problem.  Fixed that and voila, fired right up.
>
> And my #1 complaint about HDSDR (the poor use of screen space with a 
> lot of clutter controls) is addressed by the magic "COLLAPSE" button.
>
> VFB!
>
> 73/jeff/ac0c
> alpha-charlie-zero-charlie
> www.ac0c.com
>
> On 02-Nov-18 1:01 AM, Bob Wilson, N6TV wrote:
>> There are many possible explanations, but the most likely cause is 
>> that a dependent DLL is missing .  Did you unzip IPP70.zip to 
>> C:Windows\SysWOW64\, without replacing any existing files?  Did you 
>> run the correct version of vcredist_x86.exe?
>>
>> All of these steps are described in more detail at the bottom of this 
>> page:
>>
>> https://github.com/HrochL/CWSL/blob/master/README.md
>>
>> You may need to run with Administrator privilege ("run as 
>> administrator") to copy files into SysWOW64.
>>
>> If you can't make any progress, an interactive TeamViewer session may 
>> be the only way to resolve this.  I can help you with that, but not 
>> until next Tuesday at the earliest.
>>
>> 73,
>> Bob, N6TV
>>
>>
>> On Thu, Nov 1, 2018 at 9:09 PM Jeff Blaine <KeepWalking188 at ac0c.com 
>> <mailto:KeepWalking188 at ac0c.com>> wrote:
>>
>>     I finally have a suitable PC to run CW SkimServ + RTTY SkimServ
>>     and it's
>>     working FB.   OS is Win10x64
>>
>>     Now I would like to get some sort of SDR app running off the 
>> CWSL_TEE
>>     feed to get a bandscope display going.  Ideally I would **LOVE**
>>     to get
>>     NAP3 cooking but alas I don't see a way to do that.
>>
>>     HDSDR should work but I get a "Load DLL failed:  The specified 
>> module
>>     could not be found."  Yet I clearly see EXTIO_CWSL.DLL properly
>>     placed
>>     in the HDSDR directory.
>>
>>     I have had HDSDR running via CWSL_TEE on the QS1R but that was a
>>     different PC several years back.
>>
>>     Makes me wonder if there is some trick to making the magic happen on
>>     Win10x64 - IF that is actually the root of the issue?
>>
>>     Hoping someone here may have been there, done that, and have the
>>     solution.  Thanks!
>>
>>     73/jeff/ac0c
>>     alpha-charlie-zero-charlie
>>     www.ac0c.com <http://www.ac0c.com>
>>
>>     _______________________________________________
>>     Skimmertalk mailing list
>>     Skimmertalk at contesting.com <mailto:Skimmertalk at contesting.com>
>>     http://lists.contesting.com/mailman/listinfo/skimmertalk
>>
>
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/skimmertalk