[Skimmertalk] skimmer with k3s RX ant IN and OUT

N4ZR n4zr at comcast.net
Mon Sep 24 07:44:34 EDT 2018

Noel, what receiver are you using?  Does the clipping indicator stay on, 
or just flash momentarily?  I am running a QS1R off the RX IN/OUT loop 
on my K3 (same as the K3S, I believe), with a Mini-Circuits splitter, 
and have not experienced anything like this.

73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

On 9/24/2018 7:04 AM, NOEL POULIN wrote:
> Hello,
> I am having a problem with skimmer and K3S rx ant IN and OUT.
> i am using the skimmer wih the K3S. I use RX ant IN and Out  on the K3S.
> Also using a splitter(DXENG MODEL DXE SC-50) to protect the SDR-IQ 
> receiver..
> The poblem is ....when I change bands with the K3S, the skimmer goes 
> When I do not use the RXANT IN and OUT ...NO PROBLEMS...SKIMMER runs 
> normaly..
> I would appreciate comments about that ...strange problem...
> If I use the skimmer with a seperate antenna ( no RXANT IN and OUT) no 
> problems at all....
> I have checked all my cables.
> Anyone in this group can help.....to point me where the problem might 
> be......
> I want to try anther kind of TEE connector...later, but the one I am 
> using is supposed to be very good quality...
> Thanks very much
> Noel
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/skimmertalk

More information about the Skimmertalk mailing list