[Skimmertalk] Difference of RP10 14 16

[Dai NAGAKURA]

Thank you Bob , Bjorn

I will try it on RP-10.

Dai JF2IWL




On Mon, 15 Jul 2019 21:55:35 -0700
"Bob Wilson, N6TV" <n6tv at arrl.net> wrote:

> For RP-10 I think you use the "official" OS, Ubuntu, not Alpine Linux.  The
> you open a web browser and enter the IP Address of the Red Pitaya, and it
> should open a page with a link to Application Marketplace that looks like
> this:   http://bazaar.redpitaya.com/ .  You can install / update the SDR
> Receiver HPSDR.
> 
> More details here:
> http://hamsci.org/n6tv-red-pitaya-combine-cw-rtty-skimmer-hdsdr
> 
> It looks like the RP-10 and RP-14 can run the same Ubuntu OS.  Instructions
> to make a new image here:
> 
> https://redpitaya.readthedocs.io/en/latest/quickStart/SDcard/SDcard.html
> 
> 73,
> Bob, N6TV
> 
> 
> On Mon, Jul 15, 2019 at 9:21 PM Dai NAGAKURA <ndai at cameo.plala.or.jp> wrote:
> 
> >
> > Thank you Bob
> >
> > Well RP-10 shall handle 8 bands,
> > but I could not find nor understand new OS and commands.
> > Would you tell where hidden gem and spell is ?
> >
> > >A preamp could make the problem worse.
> >
> > This is delicate issue.
> > At this point , We are expecting furthe$B~?C
(Bstudy.
> >
> > Thank you
> > Dai JF2IWL
> >
> >
> >
> >
> >
> > On Mon, 15 Jul 2019 20:46:33 -0700
> > "Bob Wilson, N6TV" <n6tv at arrl.net> wrote:
> >
> > > On Mon, Jul 15, 2019 at 8:09 PM Dai NAGAKURA <ndai at cameo.plala.or.jp>
> > wrote:
> > >
> > > > I have tested RP-10 and 14 , five weekdays and IARU HF 24 hours.
> > > >
> > >
> > > Thank you.
> > >
> > >
> > > > To write a brief paper, I would like to know two point below.
> > > >
> > > > (1) RP-10 could run only 6 bands at the same time
> > > > RP-14=8 bands , RP-16=8x2=16 bands . is it right ?
> > > >
> > >
> > > I'm not sure about the RP-10, I thought it was also 8 bands.  RP-14 is
> > > definitely 8 bands, and RP-16 = 8x2 = 16, correct.
> > >
> > >
> > > > (2) RP-10 and RP-14 need step down transformer and pre-amp Instead,
> > RP-16
> > > > need NOT Both.
> > > >
> > >
> > > Yes, RP-10 and RP-14 both need to have 14:1 impedance transformers (and
> > > shunt jumpers moved on both inputs), and they need about a 10 dB preamp.
> > >
> > > I am not sure if the RP-16 needs a preamp.  Maybe only on one antenna
> > > input, just for the high bands.  But it is easily overloaded (intermod)
> > by
> > > nearby FM broadcast stations between 88 and 108 Mhz, and needs a lowpass
> > > filter.  A preamp could make the problem worse.
> > >
> > > 73,
> > > Bob, N6TV
> >
> > --
> > Dai NAGAKURA <ndai at cameo.plala.or.jp>
> >
> > _______________________________________________
> > Skimmertalk mailing list
> > Skimmertalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/skimmertalk
> >

-- 
Dai NAGAKURA <ndai at cameo.plala.or.jp>