From KeepWalking188 at ac0c.com Sat Sep 28 08:58:33 2019 From: KeepWalking188 at ac0c.com (Jeff Blaine) Date: Sat, 28 Sep 2019 07:58:33 -0500 Subject: [Skimmertalk] 10 Hz RTTY skimserv spots Message-ID: <554e9d72-c4ac-5eca-0762-2f2c5ce01e1e@ac0c.com> I have 2 RTTY skimmers here, both running off the QS1R.? Both using v1.3 of the SkimServ RTTY decoder. One provides the 10 Hz TELNET spot.? The other is providing only the 100 Hz feed. I cannot find any difference in the .INI files.? Where is the magic switch to flip on my 100 Hz only box? Thanks! 73/jeff/ac0c alpha-charlie-zero-charlie www.ac0c.com From davekm3t at gmail.com Sat Sep 28 10:17:16 2019 From: davekm3t at gmail.com (Dave Pascoe) Date: Sat, 28 Sep 2019 10:17:16 -0400 Subject: [Skimmertalk] 10 Hz RTTY skimserv spots In-Reply-To: <554e9d72-c4ac-5eca-0762-2f2c5ce01e1e@ac0c.com> References: <554e9d72-c4ac-5eca-0762-2f2c5ce01e1e@ac0c.com> Message-ID: Jeff- I believe it is in the [Telnet] section of the RTTY Skimmer .ini file. Set it to 0 (off) or 1 (on): TensHz=0 or TensHz=1 73, Dave KM3T On Sat, Sep 28, 2019 at 8:58 AM Jeff Blaine wrote: > I have 2 RTTY skimmers here, both running off the QS1R. Both using v1.3 > of the SkimServ RTTY decoder. > > One provides the 10 Hz TELNET spot. The other is providing only the 100 > Hz feed. > > I cannot find any difference in the .INI files. Where is the magic > switch to flip on my 100 Hz only box? > > Thanks! > > 73/jeff/ac0c > alpha-charlie-zero-charlie > www.ac0c.com > > > _______________________________________________ > Skimmertalk mailing list > Skimmertalk at contesting.com > http://lists.contesting.com/mailman/listinfo/skimmertalk > -------------- next part -------------- An HTML attachment was scrubbed... URL: From KeepWalking188 at ac0c.com Sat Sep 28 10:31:02 2019 From: KeepWalking188 at ac0c.com (Jeff Blaine) Date: Sat, 28 Sep 2019 09:31:02 -0500 Subject: [Skimmertalk] 10 Hz RTTY skimserv spots In-Reply-To: References: <554e9d72-c4ac-5eca-0762-2f2c5ce01e1e@ac0c.com> Message-ID: <38d0eb7b-5911-5d58-9581-99557608f721@ac0c.com> Thanks Dave. I made the change and no joy.? But after restarting aggregator & skimmer, it fired up with 10Hz data after that.? Maybe I should have restarted aggregator after updating Skimmer to v1.3. In any event, it's good now.? Nice distraction from lousy bands, slow rates and a lot of thumb twiddling in the CQ RTTY DX contest. 73/jeff/ac0c alpha-charlie-zero-charlie www.ac0c.com On 9/28/19 9:17 AM, Dave Pascoe wrote: > Jeff- > > I believe it is in the [Telnet] section of the RTTY Skimmer .ini file. > > ?Set it to 0 (off) or 1 (on): > > TensHz=0 > or > TensHz=1 > > 73, > Dave KM3T > > > > On Sat, Sep 28, 2019 at 8:58 AM Jeff Blaine > wrote: > > I have 2 RTTY skimmers here, both running off the QS1R.? Both > using v1.3 > of the SkimServ RTTY decoder. > > One provides the 10 Hz TELNET spot.? The other is providing only > the 100 > Hz feed. > > I cannot find any difference in the .INI files.? Where is the magic > switch to flip on my 100 Hz only box? > > Thanks! > > 73/jeff/ac0c > alpha-charlie-zero-charlie > www.ac0c.com > > > _______________________________________________ > Skimmertalk mailing list > Skimmertalk at contesting.com > http://lists.contesting.com/mailman/listinfo/skimmertalk > -------------- next part -------------- An HTML attachment was scrubbed... URL: