From n4zr at comcast.net Sat Aug 1 08:54:54 2020 From: n4zr at comcast.net (N4ZR) Date: Sat, 1 Aug 2020 08:54:54 -0400 Subject: [Skimmertalk] [RBN-OPS] RP-16 stopped working - need troubleshooting help In-Reply-To: <16272525954B2969.21635@groups.io> References: <16272525954B2969.21635@groups.io> Message-ID: Further to this, I have gotten in to the Alpine Linux OS on the RP16, via USB, and there is no indication of trouble that I can see.? Of course, I've forgotten the few things I learned about Linux a year ago. 73, Pete N4ZR Check out the Reverse Beacon Network at , now spotting RTTY activity worldwide. For spots, please use your favorite "retail" DX cluster. On 8/1/2020 8:37 AM, Pete Smith wrote: > > This morning, when I went to restart my RBN node after last night's > thunderstorms, the startup routine seemed to be normal, but neither CW > or RTTY Skimsrv will start, both indicating that they can't find the > receiver.? My router doesn't show either receiver's IP address as > "active.".? Antenna was disconnected during the WX, and the RP was > powered down, so I think lightning damage is unlikely? I've looked at > the SD card in a card reader and it looks normal; tried another known > good one, no change. Verified that the K3IT interface dlls are > properly titled. > > Trouble-shooting suggestions urgently needed! > > -- > 73, Pete N4ZR > Check out the Reverse Beacon Network > at, now > spotting RTTY activity worldwide. > For spots, please use your favorite > "retail" DX cluster. > _._,_._,_ > ------------------------------------------------------------------------ > Groups.io Links: > > You receive all messages sent to this group. > > View/Reply Online (#4681) | > Reply To Group > > | Reply To Sender > > | Mute This Topic | New Topic > > > Your Subscription | > Contact Group Owner | Unsubscribe > > [n4zr at comcast.net] > > _._,_._,_ -------------- next part -------------- An HTML attachment was scrubbed... URL: From n4zr at comcast.net Sat Aug 1 09:22:00 2020 From: n4zr at comcast.net (N4ZR) Date: Sat, 1 Aug 2020 09:22:00 -0400 Subject: [Skimmertalk] SOLVED: Re: [RBN-OPS] RP-16 stopped working - need troubleshooting help In-Reply-To: <16272525954B2969.21635@groups.io> References: <16272525954B2969.21635@groups.io> Message-ID: <10cd7feb-94b8-e63f-1c05-30c0f63d0697@comcast.net> Found the problem - something dumb - Ethernet cable not properly seated in switch 73, Pete N4ZR Check out the Reverse Beacon Network at , now spotting RTTY activity worldwide. For spots, please use your favorite "retail" DX cluster. On 8/1/2020 8:37 AM, Pete Smith wrote: > > This morning, when I went to restart my RBN node after last night's > thunderstorms, the startup routine seemed to be normal, but neither CW > or RTTY Skimsrv will start, both indicating that they can't find the > receiver.? My router doesn't show either receiver's IP address as > "active.".? Antenna was disconnected during the WX, and the RP was > powered down, so I think lightning damage is unlikely? I've looked at > the SD card in a card reader and it looks normal; tried another known > good one, no change. Verified that the K3IT interface dlls are > properly titled. > > Trouble-shooting suggestions urgently needed! > > -- > 73, Pete N4ZR > Check out the Reverse Beacon Network > at, now > spotting RTTY activity worldwide. > For spots, please use your favorite > "retail" DX cluster. > _._,_._,_ > ------------------------------------------------------------------------ > Groups.io Links: > > You receive all messages sent to this group. > > View/Reply Online (#4681) | > Reply To Group > > | Reply To Sender > > | Mute This Topic | New Topic > > > Your Subscription | > Contact Group Owner | Unsubscribe > > [n4zr at comcast.net] > > _._,_._,_ -------------- next part -------------- An HTML attachment was scrubbed... URL: