From k3ukandy at gmail.com Sun Oct 18 11:46:30 2020 From: k3ukandy at gmail.com (Andrew O'Brien) Date: Sun, 18 Oct 2020 11:46:30 -0400 Subject: [Skimmertalk] CWS with Icom 705 .... IF setting ? Message-ID: I am having a familiar problem that has occasionally flared up when using CWS with various radios. I am trying to use it with the IC-705 and "most" is working as you would expect except that I don't think I have found the right Audio IF setting when using softrock-IF . The signal I am decoding in CWS is not the signal I am hearing in the radio , they appear to be about 3 khz off. I am currently dancing up and down trying to find a setting where both are the same. I am using the 12 khz IF setting in the 705. CWS is seeing about 12 khz of signals Andy K3UK -------------- next part -------------- An HTML attachment was scrubbed... URL: From k3ukandy at gmail.com Sun Oct 18 11:57:47 2020 From: k3ukandy at gmail.com (Andrew O'Brien) Date: Sun, 18 Oct 2020 11:57:47 -0400 Subject: [Skimmertalk] CWS with Icom 705 .... IF setting ? In-Reply-To: References: Message-ID: Solved , 12000 is the IF Audio setting Andy K3UK On Sun, Oct 18, 2020 at 11:46 AM Andrew O'Brien wrote: > I am having a familiar problem that has occasionally flared up when using > CWS with various radios. I am trying to use it with the IC-705 and "most" > is working as you would expect except that I don't think I have found the > right Audio IF setting when using softrock-IF . The signal I am decoding > in CWS is not the signal I am hearing in the radio , they appear to be > about 3 khz off. I am currently dancing up and down trying to find a > setting where both are the same. I am using the 12 khz IF setting in the > 705. CWS is seeing about 12 khz of signals > > > Andy K3UK > -------------- next part -------------- An HTML attachment was scrubbed... URL: