[Skimmertalk] RU9CZD skimmer QS1R died in the recent thunderstorm. Help needed.

Prasad VU2PTT vu2ptt at gmail.com
Fri Aug 13 08:35:08 EDT 2021


Igor,

I had lost the USB chip in the QS1R here from a very nearby lightning
strike some time back. Replacing it worked - nothing else was affected on
the board. Lost many other things too but the QS1R had only this part
damaged.

Good luck!

73,

Prasad VU2PTT.

On Fri, 13 Aug 2021 at 6:58 AM, Igor Sokolov <ua9cdc at gmail.com> wrote:

> Thank you guys. Visual inspection did no reveal any damage. The radio
> does not respond when connected to computer USB. That is why we thought
> may be only USB was affected. IF the USB chip CY7C6813A does not require
> firmware we will try to substitute it first.
>
> 13.08.2021 0:01, Pete Smith N4ZR пишет:
> >
> > Amen.  I thought mine had a USB transceiver problem, but when I looked
> > more closely, the ADC chip - still a $105 part - showed severe burning
> > and bubbling on its top surface.  Since there is very little between
> > the antenna input and the ADC, it's not hard to imagine lightning damage.
> >
> > 73, Pete N4ZR
> > Check out the new Reverse Beacon Network
> > web server at<http://beta.reversebeacon.net>.
> > For spots, please use your favorite
> > "retail" DX cluster.
> > On 8/12/2021 2:50 PM, Bob Wilson, N6TV wrote:
> >> That is the USB transceiver chip, so I imagine it does not need any
> >> firmware installed.
> >>
> >> But if there was lightning nearby while the antenna was connected,
> >> many more chips could be damaged.
> >>
> >> 73,
> >> Bob, N6TV
> >>
> >>
> >> On Thu, Aug 12, 2021 at 11:20 AM Igor Sokolov <ua9cdc at gmail.com
> >> <mailto:ua9cdc at gmail.com>> wrote:
> >>
> >>     RU9CZD skimmer is off line as our trusted QS1R that have been
> >>     serving us
> >>     for many years went out of order during recent thunderstorm. We
> >>     would
> >>     like to try and fix it. The suspect is CY7C6813A. This chip is
> >>     available
> >>     locally but the question is, does it need some sort of firmware
> >>     installed prior to soldering it in. Is this firmware available from
> >>     somewhere? Help would be highly appreciated.
> >>
> >>
> >>     73, Igor UA9CDC
> >>
> >>     _______________________________________________
> >>     Skimmertalk mailing list
> >>     Skimmertalk at contesting.com <mailto:Skimmertalk at contesting.com>
> >>     http://lists.contesting.com/mailman/listinfo/skimmertalk
> >>     <http://lists.contesting.com/mailman/listinfo/skimmertalk>
> >>
> >>
> >> _______________________________________________
> >> Skimmertalk mailing list
> >> Skimmertalk at contesting.com
> >> http://lists.contesting.com/mailman/listinfo/skimmertalk
> >
> > _______________________________________________
> > Skimmertalk mailing list
> > Skimmertalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/skimmertalk
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/skimmertalk
>
-- 

73 de Prasad VU2PTT, W2PTT (ex-AF6DV)

ARSI, ARRL, FOC, CWOPS, IFROAR, MARC
NCDXF, INDEXA, SCCC, EUPSK, IOTA, VUCC
ARRL DXCC Checkpoint
CQ Awards Checkpoint
Coordinator - VU Contest Group www.vucg.in
Webmaster - Logger32 www.logger32.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/skimmertalk/attachments/20210813/2b7fefa6/attachment.html>


More information about the Skimmertalk mailing list