[Skimmertalk] Error trying to get CW and RTTY to run at the same time

[Bob Wilson, N6TV]

What's your call Matt?

CWSL_Tee + SkimSrv + RTTYSkimServ works fine IF you start SkimServ first.  *Do
NOT copy HermesIntf.dll to the RttySkimServ folder*, only *CWSL_Tee.dll*
and *CWSL_Tee.cfg* and (maybe) QS1RIntf.dll.  There must be three
identical copies of *CWSL_Tee.cfg* in all three folders:

SkimSrv
RttySkimServ
Aggregator folder

Why is this?  CWSL_Tee.dll loads one copy of HermesIntf, then shares it
with any other skimmers that load CWSL_Tee.dll.  If another program tries
to load HermesIntf, that reinitializes the SDR and everything halts.

If you still can't get it going, I can help via TeamViewer.  Contact me off
list.

73,
Bob, N6TV


On Sun, Sep 12, 2021 at 12:28 AM Matt Howard <matthoward.sg at outlook.com>
wrote:

> Hi
>
> following various install guides including N6TV, the RBN guide etc
> RP 125-14 (yes I know not ideal but that's what I had in the junk box)
>
> RP HPSDR is running as expected
>
> Intel I7 32GB ram - plenty of grunt PC
>
> everything connected using ethernet
>
> I have successfully installed CW and RTTY skimmer servers (both registered
> software)
> when started independently they are fine and perform as expected
>
> CWSL_Tee. HermesIIntf, IPP, vcredist etc are all installed and appear to
> be running bas expected
>
> Each skimmer runs as per normal when started separately - Aggregator is
> setup and appears to run as well
>
> When I start both skimmers using the "now" button or by starting CW then
> RTTY manually - several things are happening
>
>    1. the registration for the RTTY seems to be lost
>    2. there is a memory error in the RTTY environment
>    3.  I get this from rtty error log
>
> =============================== EXCEPTION
> ======================================
>
> ================================================================================
> Exception time   : 2021-09-12 15:03:33.495
> Exception class  : EZeroDivide
> Exception message: Floating point division by zero
> ------------------------------ call stack
> --------------------------------------
> (0000F6D2){RttySkimServ.exe} [004106D2]
> (001557E0){RttySkimServ.exe} [005567E0]
> (00155677){RttySkimServ.exe} [00556677]
> (00156A53){RttySkimServ.exe} [00557A53]
> (0001B6BC){RttySkimServ.exe} [0041C6BC]
> (0001BE16){RttySkimServ.exe} [0041CE16]
> (0000491B){RttySkimServ.exe} [0040591B]
> (00127FDF){RttySkimServ.exe} [00528FDF]
> (00161CA5){RttySkimServ.exe} [00562CA5]
> (00162DA5){RttySkimServ.exe} [00563DA5]
> (00163018){RttySkimServ.exe} [00564018]
> (00167BFE){RttySkimServ.exe} [00568BFE]
> (0001DDBD){RttySkimServ.exe} [0041EDBD]
> (000C1CE1){RttySkimServ.exe} [004C2CE1]
> (000C191D){RttySkimServ.exe} [004C291D]
> (0000474D){RttySkimServ.exe} [0040574D]
> (000C18F3){RttySkimServ.exe} [004C28F3]
> (000CC116){RttySkimServ.exe} [004CD116]
> (0017454C){RttySkimServ.exe} [0057554C]
> (0030BFA3){RttySkimServ.exe} [0070CFA3]
> (002F6AE7){RttySkimServ.exe} [006F7AE7]
> (0030DA4E){RttySkimServ.exe} [0070EA4E]
> (0030CAC4){RttySkimServ.exe} [0070DAC4]
> (0030D3D4){RttySkimServ.exe} [0070E3D4]
> (0030D453){RttySkimServ.exe} [0070E453]
> (0030AA0A){RttySkimServ.exe} [0070BA0A]
> (002F6BA3){RttySkimServ.exe} [006F7BA3]
> (002F7484){RttySkimServ.exe} [006F8484]
> (00309B06){RttySkimServ.exe} [0070AB06]
> (00311208){RttySkimServ.exe} [00712208]
> (00311257){RttySkimServ.exe} [00712257]
> (0030A3B4){RttySkimServ.exe} [0070B3B4]
>
> ================================================================================
>
>
>
>    1. I get this from the CSDWL_Tee log
>
> 12/09 14:57:11 SetRxFrequency starting with Frequency=7091000, Receiver=0
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 0 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=10191000, Receiver=1
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 1 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=14091000, Receiver=2
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 2 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=18159000, Receiver=3
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 3 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=21091000, Receiver=4
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 4 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=24981000, Receiver=5
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 5 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=28091000, Receiver=6
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 6 does not have
> opened shared memory
> 12/09 14:57:11 DLL_PROCESS_DETTACH
> 12/09 14:57:11 DLL_PROCESS_ATTACH
>
>
> any experience thoughts would be appreciated as I appear to be very close
> to getting this to run
>
>
>
> Matt
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/skimmertalk
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/skimmertalk/attachments/20210912/471214ba/attachment-0001.html>