[Skimmertalk] CX6VM RedPitaya not working

[Jorge Diez - CX6VM]

GM

finally is up again

Tried several times connecting and disconnecting LAN and power cables but
finally after changing switch LAN port it was up again

73,
Jorge
CX6VM/CW5W

El vie, 10 sept 2021 a las 9:44, Pete Smith N4ZR (<pete.n4zr at gmail.com>)
escribió:

> Jorge, the "too many receivers" message is a misnomer.  What it really
> means is that Skimmer Server cannot find your receiver, which may in turn
> mean that your Ethernet connection is not working.  Take a look at the
> Ethernet connector on the RP, right after the yellow blinking light for
> booting up goes out, and without Skimsrv running.  It should show a green
> light on steadily on the left, and a yellow light blinking occasionally on
> the right.  Start Skimsrv, and the right-hand yellow light should begin
> blinking rapidly and steadily.  If this doesn't happen, connect some other
> Ethernet device to your computer (your Internet router, perhaps) and see if
> it operates normally.
>
> 73, Pete N4ZR
> Check out the new Reverse Beacon Network
> web server at <http://beta.reversebeacon.net> <http://beta.reversebeacon.net>.
> For spots, please use your favorite
> "retail" DX cluster.
>
> On 9/10/2021 8:00 AM, Jorge Diez - CX6VM wrote:
>
> Hello
>
> My skimmer turns on the right lights, but is not OK. Too many receivers
> message instead I have only 1 band selected.
>
> Any idea to check and try to solve this problem?
>
> thanks!!
>
> --
> 73,
> Jorge
> CX6VM/CW5W
>
> _______________________________________________
> Skimmertalk mailing listSkimmertalk at contesting.comhttp://lists.contesting.com/mailman/listinfo/skimmertalk
>
>

-- 
73,
Jorge
CX6VM/CW5W
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/skimmertalk/attachments/20210912/91bcb950/attachment.html>