Thanks Dave.

I made the change and no joy.  But after restarting aggregator & skimmer, it fired up with 10Hz data after that.  Maybe I should have restarted aggregator after updating Skimmer to v1.3.  In any event, it's good now.  Nice distraction from lousy bands, slow rates and a lot of thumb twiddling in the CQ RTTY DX contest.

73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com

Jeff-

I believe it is in the [Telnet] section of the RTTY Skimmer .ini file.

 Set it to 0 (off) or 1 (on):

TensHz=0

or

TensHz=1

73,

Dave KM3T

On Sat, Sep 28, 2019 at 8:58 AM Jeff Blaine <KeepWalking188@ac0c.com> wrote:

I have 2 RTTY skimmers here, both running off the QS1R.  Both using v1.3
of the SkimServ RTTY decoder.

One provides the 10 Hz TELNET spot.  The other is providing only the 100
Hz feed.

I cannot find any difference in the .INI files.  Where is the magic
switch to flip on my 100 Hz only box?

Thanks!

73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com


_______________________________________________
Skimmertalk mailing list
Skimmertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/skimmertalk