So you're monitoring the IC-7610 IF by USB 1 connector?  Or USB 2?  Did you try backing off Set > Connectors > USB AF/IF Output > IF Output Level?

I don't know much else to tell you as I have no experience with IC-7610 to HDSDR to CW Skimmer configuration and settings.  This may not be the right place to ask.  Try the IC-7610 group.

73,
Bob, N6TV


On Tue, Jun 2, 2020 at 8:16 PM Andrew O'Brien <k3ukandy@gmail.com> wrote:
Icom 7610 with HDSDR in the chain. 

Andy


On Jun 2, 2020, at 11:11 PM, Bob Wilson, N6TV <n6tv@arrl.net> wrote:


But what is the SDR?  Loud signals on low-end SDRs will do this.

73,
Bob, N6TV


On Tue, Jun 2, 2020 at 7:51 PM Andrew O'Brien <k3ukandy@gmail.com> wrote:
Within the past few weeks  I have experienced multiple lines in the waterfall of the same signal, many .  Sometimes 50 or more . If I stop the waterfall and restart it, everything will be fine for a few minutes and then the problem will reoccur.  It is most prominent on a loud signals.  I have this situation on two different Windows 10 computers that has not previously had problems like this for years, Another ham is also experiencing this.  Any one else ?

One machine is a desktop AMD  A8-5500 3200 Mhz  2 core and 12 megs RAM.  The other is an i5 laptop 1.8 MHz, 4 core ,  8 megs RAM. 

Andy K3UK
_______________________________________________
Skimmertalk mailing list
Skimmertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/skimmertalk
_______________________________________________
Skimmertalk mailing list
Skimmertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/skimmertalk