Bob

Here is what datasheet says: (link to datasheet -
https://static.chipdip.ru/lib/260/DOC000260334.pdf)

Software: 8051 code runs from:
❐Internal RAM, which is downloaded through USB
❐Internal RAM, which is loaded from EEPROM
❐External memory device (128 pin package)

So you recon the internal 8051 is loaded through USB or from external
memory when connected to  a computer?

73, Igor UA9CDC


12.08.2021 23:50, Bob Wilson, N6TV пишет:
> That is the USB transceiver chip, so I imagine it does not need any
> firmware installed.
>
> But if there was lightning nearby while the antenna was connected,
> many more chips could be damaged.
>
> 73,
> Bob, N6TV
>
>
> On Thu, Aug 12, 2021 at 11:20 AM Igor Sokolov <ua9cdc@gmail.com
> <mailto:ua9cdc@gmail.com>> wrote:
>
>     RU9CZD skimmer is off line as our trusted QS1R that have been
>     serving us
>     for many years went out of order during recent thunderstorm. We would
>     like to try and fix it. The suspect is CY7C6813A. This chip is
>     available
>     locally but the question is, does it need some sort of firmware
>     installed prior to soldering it in. Is this firmware available from
>     somewhere? Help would be highly appreciated.
>
>
>     73, Igor UA9CDC
>
>     _______________________________________________
>     Skimmertalk mailing list
>     Skimmertalk@contesting.com <mailto:Skimmertalk@contesting.com>
>     http://lists.contesting.com/mailman/listinfo/skimmertalk
>     <http://lists.contesting.com/mailman/listinfo/skimmertalk>
>
>
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/skimmertalk
_______________________________________________
Skimmertalk mailing list
Skimmertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/skimmertalk