Jorge, the "too many receivers" message is a misnomer.  What it really means is that Skimmer Server cannot find your receiver, which may in turn mean that your Ethernet connection is not working.  Take a look at the Ethernet connector on the RP, right after the yellow blinking light for booting up goes out, and without Skimsrv running.  It should show a green light on steadily on the left, and a yellow light blinking occasionally on the right.  Start Skimsrv, and the right-hand yellow light should begin blinking rapidly and steadily.  If this doesn't happen, connect some other Ethernet device to your computer (your Internet router, perhaps) and see if it operates normally.

73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at <http://beta.reversebeacon.net>.
For spots, please use your favorite 
"retail" DX cluster.

On 9/10/2021 8:00 AM, Jorge Diez - CX6VM wrote:

Hello

My skimmer turns on the right lights, but is not OK. Too many receivers message instead I have only 1 band selected.

Any idea to check and try to solve this problem?

thanks!!

--

73,
Jorge
CX6VM/CW5W

_______________________________________________
Skimmertalk mailing list
Skimmertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/skimmertalk