Hi

my call 9V1MH / VK2AMH / YF2AAH

I have followed the instructions very carefully in this page (N6TV - Red Pitaya Combine CW & RTTY Skimmer & HDSDR | HamSCI) and can confirm that

  1. there is an identical cswl_tee.cfg file containing hermesintf and 64 lines as described
  2. there is no hermesintf dll in the rty skim directory
  3. i did start skimsrv first and rty serv second and get the error
  4. that cwsl_tee dll is in the sim srv and rtty srv directories
i was thinking perhaps there is a version error for either the cswl or ipp or aggregator installation?
I did get the latest IPP70 from HrochL github and not IPP51
also using hermesintf 2.17.1
and aggregator 6.38

i did note there was a "good old stable" verion of software ion the github repository - perhaps I should start there??

happy to do a teamviewer if there is nothing in the above that is a problem

73
Matt

From: Skimmertalk <skimmertalk-bounces+matthoward.sg=outlook.com@contesting.com> on behalf of skimmertalk-request@contesting.com <skimmertalk-request@contesting.com>
Sent: Sunday, 12 September 2021 11:56 PM
To: skimmertalk@contesting.com <skimmertalk@contesting.com>
Subject: Skimmertalk Digest, Vol 149, Issue 5
 
Send Skimmertalk mailing list submissions to
        skimmertalk@contesting.com

To subscribe or unsubscribe via the World Wide Web, visit
        https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Fskimmertalk&amp;data=04%7C01%7C%7C47b7cb92fb73475e059108d97605eb8b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637670590062692537%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=nkqXlaCodjHW6%2Bt4oxnXC0N2Ls%2FtJ2g%2FRDwRMGG6BqE%3D&amp;reserved=0
or, via email, send a message with subject or body 'help' to
        skimmertalk-request@contesting.com

You can reach the person managing the list at
        skimmertalk-owner@contesting.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Skimmertalk digest..."


Today's Topics:

   1. Error trying to get CW and RTTY to run at the same time
      (Matt Howard)
   2. Re: Error trying to get CW and RTTY to run at the same time
      (Bob Wilson, N6TV)


----------------------------------------------------------------------

Message: 1
Date: Sun, 12 Sep 2021 07:27:51 +0000
From: Matt Howard <matthoward.sg@outlook.com>
To: "skimmertalk@contesting.com" <skimmertalk@contesting.com>
Subject: [Skimmertalk] Error trying to get CW and RTTY to run at the
        same time
Message-ID:
        <DM6PR14MB26205D450860B6BE98A4650AEDD89@DM6PR14MB2620.namprd14.prod.outlook.com>
       
Content-Type: text/plain; charset="iso-8859-1"

Hi

following various install guides including N6TV, the RBN guide etc
RP 125-14 (yes I know not ideal but that's what I had in the junk box)

RP HPSDR is running as expected

Intel I7 32GB ram - plenty of grunt PC

everything connected using ethernet

I have successfully installed CW and RTTY skimmer servers (both registered software)
when started independently they are fine and perform as expected

CWSL_Tee. HermesIIntf, IPP, vcredist etc are all installed and appear to be running bas expected

Each skimmer runs as per normal when started separately - Aggregator is setup and appears to run as well

When I start both skimmers using the "now" button or by starting CW then RTTY manually - several things are happening

  1.  the registration for the RTTY seems to be lost
  2.  there is a memory error in the RTTY environment
  3.   I get this from rtty error log

=============================== EXCEPTION ======================================
================================================================================
Exception time   : 2021-09-12 15:03:33.495
Exception class  : EZeroDivide
Exception message: Floating point division by zero
------------------------------ call stack --------------------------------------
(0000F6D2){RttySkimServ.exe} [004106D2]
(001557E0){RttySkimServ.exe} [005567E0]
(00155677){RttySkimServ.exe} [00556677]
(00156A53){RttySkimServ.exe} [00557A53]
(0001B6BC){RttySkimServ.exe} [0041C6BC]
(0001BE16){RttySkimServ.exe} [0041CE16]
(0000491B){RttySkimServ.exe} [0040591B]
(00127FDF){RttySkimServ.exe} [00528FDF]
(00161CA5){RttySkimServ.exe} [00562CA5]
(00162DA5){RttySkimServ.exe} [00563DA5]
(00163018){RttySkimServ.exe} [00564018]
(00167BFE){RttySkimServ.exe} [00568BFE]
(0001DDBD){RttySkimServ.exe} [0041EDBD]
(000C1CE1){RttySkimServ.exe} [004C2CE1]
(000C191D){RttySkimServ.exe} [004C291D]
(0000474D){RttySkimServ.exe} [0040574D]
(000C18F3){RttySkimServ.exe} [004C28F3]
(000CC116){RttySkimServ.exe} [004CD116]
(0017454C){RttySkimServ.exe} [0057554C]
(0030BFA3){RttySkimServ.exe} [0070CFA3]
(002F6AE7){RttySkimServ.exe} [006F7AE7]
(0030DA4E){RttySkimServ.exe} [0070EA4E]
(0030CAC4){RttySkimServ.exe} [0070DAC4]
(0030D3D4){RttySkimServ.exe} [0070E3D4]
(0030D453){RttySkimServ.exe} [0070E453]
(0030AA0A){RttySkimServ.exe} [0070BA0A]
(002F6BA3){RttySkimServ.exe} [006F7BA3]
(002F7484){RttySkimServ.exe} [006F8484]
(00309B06){RttySkimServ.exe} [0070AB06]
(00311208){RttySkimServ.exe} [00712208]
(00311257){RttySkimServ.exe} [00712257]
(0030A3B4){RttySkimServ.exe} [0070B3B4]
================================================================================



  1.  I get this from the CSDWL_Tee log

12/09 14:57:11 SetRxFrequency starting with Frequency=7091000, Receiver=0
12/09 14:57:11 Error: SetRxFrequency: Receiver with number 0 does not have opened shared memory
12/09 14:57:11 SetRxFrequency starting with Frequency=10191000, Receiver=1
12/09 14:57:11 Error: SetRxFrequency: Receiver with number 1 does not have opened shared memory
12/09 14:57:11 SetRxFrequency starting with Frequency=14091000, Receiver=2
12/09 14:57:11 Error: SetRxFrequency: Receiver with number 2 does not have opened shared memory
12/09 14:57:11 SetRxFrequency starting with Frequency=18159000, Receiver=3
12/09 14:57:11 Error: SetRxFrequency: Receiver with number 3 does not have opened shared memory
12/09 14:57:11 SetRxFrequency starting with Frequency=21091000, Receiver=4
12/09 14:57:11 Error: SetRxFrequency: Receiver with number 4 does not have opened shared memory
12/09 14:57:11 SetRxFrequency starting with Frequency=24981000, Receiver=5
12/09 14:57:11 Error: SetRxFrequency: Receiver with number 5 does not have opened shared memory
12/09 14:57:11 SetRxFrequency starting with Frequency=28091000, Receiver=6
12/09 14:57:11 Error: SetRxFrequency: Receiver with number 6 does not have opened shared memory
12/09 14:57:11 DLL_PROCESS_DETTACH
12/09 14:57:11 DLL_PROCESS_ATTACH


any experience thoughts would be appreciated as I appear to be very close to getting this to run



Matt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fpipermail%2Fskimmertalk%2Fattachments%2F20210912%2F02f1b83b%2Fattachment-0001.html&amp;data=04%7C01%7C%7C47b7cb92fb73475e059108d97605eb8b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637670590062692537%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=OItitxMSsbRC%2BoHTcUOuyTK7EHQnIO46mVGQaflgygI%3D&amp;reserved=0>

------------------------------

Message: 2
Date: Sun, 12 Sep 2021 08:55:57 -0700
From: "Bob Wilson, N6TV" <n6tv@arrl.net>
To: Matt Howard <matthoward.sg@outlook.com>,     SkimmerTalk Reflector
        <skimmertalk@contesting.com>
Subject: Re: [Skimmertalk] Error trying to get CW and RTTY to run at
        the same time
Message-ID:
        <CAOmNKG+HtnZH4iQA2L3Cj4dDf77tXdanS4S6F=QyARoJN665Cw@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

What's your call Matt?

CWSL_Tee + SkimSrv + RTTYSkimServ works fine IF you start SkimServ first.  *Do
NOT copy HermesIntf.dll to the RttySkimServ folder*, only *CWSL_Tee.dll*
and *CWSL_Tee.cfg* and (maybe) QS1RIntf.dll.  There must be three
identical copies of *CWSL_Tee.cfg* in all three folders:

SkimSrv
RttySkimServ
Aggregator folder

Why is this?  CWSL_Tee.dll loads one copy of HermesIntf, then shares it
with any other skimmers that load CWSL_Tee.dll.  If another program tries
to load HermesIntf, that reinitializes the SDR and everything halts.

If you still can't get it going, I can help via TeamViewer.  Contact me off
list.

73,
Bob, N6TV


On Sun, Sep 12, 2021 at 12:28 AM Matt Howard <matthoward.sg@outlook.com>
wrote:

> Hi
>
> following various install guides including N6TV, the RBN guide etc
> RP 125-14 (yes I know not ideal but that's what I had in the junk box)
>
> RP HPSDR is running as expected
>
> Intel I7 32GB ram - plenty of grunt PC
>
> everything connected using ethernet
>
> I have successfully installed CW and RTTY skimmer servers (both registered
> software)
> when started independently they are fine and perform as expected
>
> CWSL_Tee. HermesIIntf, IPP, vcredist etc are all installed and appear to
> be running bas expected
>
> Each skimmer runs as per normal when started separately - Aggregator is
> setup and appears to run as well
>
> When I start both skimmers using the "now" button or by starting CW then
> RTTY manually - several things are happening
>
>    1. the registration for the RTTY seems to be lost
>    2. there is a memory error in the RTTY environment
>    3.  I get this from rtty error log
>
> =============================== EXCEPTION
> ======================================
>
> ================================================================================
> Exception time   : 2021-09-12 15:03:33.495
> Exception class  : EZeroDivide
> Exception message: Floating point division by zero
> ------------------------------ call stack
> --------------------------------------
> (0000F6D2){RttySkimServ.exe} [004106D2]
> (001557E0){RttySkimServ.exe} [005567E0]
> (00155677){RttySkimServ.exe} [00556677]
> (00156A53){RttySkimServ.exe} [00557A53]
> (0001B6BC){RttySkimServ.exe} [0041C6BC]
> (0001BE16){RttySkimServ.exe} [0041CE16]
> (0000491B){RttySkimServ.exe} [0040591B]
> (00127FDF){RttySkimServ.exe} [00528FDF]
> (00161CA5){RttySkimServ.exe} [00562CA5]
> (00162DA5){RttySkimServ.exe} [00563DA5]
> (00163018){RttySkimServ.exe} [00564018]
> (00167BFE){RttySkimServ.exe} [00568BFE]
> (0001DDBD){RttySkimServ.exe} [0041EDBD]
> (000C1CE1){RttySkimServ.exe} [004C2CE1]
> (000C191D){RttySkimServ.exe} [004C291D]
> (0000474D){RttySkimServ.exe} [0040574D]
> (000C18F3){RttySkimServ.exe} [004C28F3]
> (000CC116){RttySkimServ.exe} [004CD116]
> (0017454C){RttySkimServ.exe} [0057554C]
> (0030BFA3){RttySkimServ.exe} [0070CFA3]
> (002F6AE7){RttySkimServ.exe} [006F7AE7]
> (0030DA4E){RttySkimServ.exe} [0070EA4E]
> (0030CAC4){RttySkimServ.exe} [0070DAC4]
> (0030D3D4){RttySkimServ.exe} [0070E3D4]
> (0030D453){RttySkimServ.exe} [0070E453]
> (0030AA0A){RttySkimServ.exe} [0070BA0A]
> (002F6BA3){RttySkimServ.exe} [006F7BA3]
> (002F7484){RttySkimServ.exe} [006F8484]
> (00309B06){RttySkimServ.exe} [0070AB06]
> (00311208){RttySkimServ.exe} [00712208]
> (00311257){RttySkimServ.exe} [00712257]
> (0030A3B4){RttySkimServ.exe} [0070B3B4]
>
> ================================================================================
>
>
>
>    1. I get this from the CSDWL_Tee log
>
> 12/09 14:57:11 SetRxFrequency starting with Frequency=7091000, Receiver=0
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 0 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=10191000, Receiver=1
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 1 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=14091000, Receiver=2
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 2 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=18159000, Receiver=3
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 3 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=21091000, Receiver=4
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 4 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=24981000, Receiver=5
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 5 does not have
> opened shared memory
> 12/09 14:57:11 SetRxFrequency starting with Frequency=28091000, Receiver=6
> 12/09 14:57:11 Error: SetRxFrequency: Receiver with number 6 does not have
> opened shared memory
> 12/09 14:57:11 DLL_PROCESS_DETTACH
> 12/09 14:57:11 DLL_PROCESS_ATTACH
>
>
> any experience thoughts would be appreciated as I appear to be very close
> to getting this to run
>
>
>
> Matt
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk@contesting.com
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Fskimmertalk&amp;data=04%7C01%7C%7C47b7cb92fb73475e059108d97605eb8b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637670590062692537%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=nkqXlaCodjHW6%2Bt4oxnXC0N2Ls%2FtJ2g%2FRDwRMGG6BqE%3D&amp;reserved=0
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fpipermail%2Fskimmertalk%2Fattachments%2F20210912%2F471214ba%2Fattachment.html&amp;data=04%7C01%7C%7C47b7cb92fb73475e059108d97605eb8b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637670590062702533%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=FCNUHttW60gdlzdcaFdPJGTL5du4EyCHgHjzfpR%2Fx8E%3D&amp;reserved=0>

------------------------------

Subject: Digest Footer

_______________________________________________
Skimmertalk mailing list
Skimmertalk@contesting.com
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Fskimmertalk&amp;data=04%7C01%7C%7C47b7cb92fb73475e059108d97605eb8b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637670590062702533%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=8EJbJVM6KinzKh%2BtJjc93V2DHoXSvUlohT3rz0F5iF0%3D&amp;reserved=0


------------------------------

End of Skimmertalk Digest, Vol 149, Issue 5
*******************************************