My key question is how to assign a static IP to the RP Skimmer receiver?
The background is this...
I have 3 RP now and in a busy contest condition, the combined network
utilization of the 1G link is pretty significant. Not nearly the point
where it swamps the network, but it's easily 30-50% of network capacity
in these conditions.
The computer I use for the skim server host has 2 LAN cards built into
the motherboard. So I'm thinking that I could probably hang the 3 RP
and a switch off of the 2nd LAN port which would isolate all that
Skimmer chatter to the 2nd LAN port and keep it all from my primary
LAN. As all the skimmer apps (as well as HSSDR) run on that computer
and no where else in the shack, I won't need to bridge the two Ethernet
connections on the motherboard.
There is no gateway bound traffic and I don't want to hang a router off
this mini-network just to provide DHCP so I'm thinking that I probably
could make this work cleanly if I can figure out how to assign the 3
individual RP with static fixed IP.
Appreciate any advice there. And if any other of you fine fellows may
have been there, done that as well.
--
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
_______________________________________________
Skimmertalk mailing list
Skimmertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/skimmertalk