Hi Folks,
I am getting a few errors.
Skimcon shows this:

CWSL_Digi shows this

2026-01-28 21:04:16.480 @@@ WARNING ::Receiver CWSL4Band1 Did not read any I/Q data from shared memory. CPU Overload?

I’m also wondering if the memory error is all of the KP5 stuff…

I know that WSJT-X does not like slash in the FT modes

2026-01-28 21:09:52.879 Message not handled: VY2XT RR73; SV1HFE <...> -10

2026-01-28 21:10:03.151 Message not handled: SP7EL <...> -02

2026-01-28 21:10:04.590 Message not handled: YO7LBX <...> -17

2026-01-28 21:10:05.243 Message not handled: W0/EA5JJN <...> RR73

2026-01-28 21:10:05.932 Message not handled: W1AW/1 <...> 73

2026-01-28 21:10:06.175 Message not handled: I1FLC <...> R-04

2026-01-28 21:10:06.175 Message not handled: K0KPS <...> +06

2026-01-28 21:10:06.175 Message not handled: K5TLJ <...> R-16

2026-01-28 21:10:07.897 Message not handled: TNX RR73 GB

2026-01-28 21:10:08.015 Message not handled: PY5EJ RR73; HG7WDL <...> -18

2026-01-28 21:10:08.017 Message not handled: F5CKQ <...> +00

2026-01-28 21:10:11.179 Message not handled: Message not handled -- too short:

2026-01-28 21:10:20.478 Message not handled: EA3KK <...> +12

2026-01-28 21:10:32.358 Message not handled: RR73 <...> 73

2026-01-28 21:10:33.174 Message not handled: W1AW/7 <...> 73

2026-01-28 21:10:34.700 Message not handled: YO7LBX <...> -17

2026-01-28 21:10:36.574 Message not handled: I1FLC <...> R-04

2026-01-28 21:10:36.574 Message not handled: K0KPS <...> +06

Memory has been a solid 13-15% usage

CPU is all over 15-70%. Nowhere pegging the meter.

Will WC2L

William Liporace WC2L

https://www.wc2l.com or https://dxc.wc2l.com

AR-Cluster Node  telnet dxc.wc2l.com 7373 or 144.93 MHz

wc2l@wc2l.com