[TenTec] OMNI VI Plus questions

[S. Lee]

Setting the clock on the OMNI VI+ requires invoking user menu #1.
To accomplish this, press and hold the LOCK button for around 2
seconds. Then press the numeric keypad number 1. Now use the
UP/DOWN arrow keys to select menu item CCd. Enter the hours and
minutes using the numeric keys. The clock begins counting when
the last digit is entered. 

INt is readout intensity, adjustable from 0 through 15 where 15
is the default value. Affects readouts and meter backlights.

LPF ? You mean the CW Low Pass DSP Filter? Just press the switch
marked DSP located near the bottom right of the keypad area. Try
tuning a very weak signal, now switch in the attenuator, back off
on the RF gain to midpoint while turning up the AF gain a tad. Now 
press the DSP button to invoke the DSP....and tell me what you hear!

Enjoy!  de AB7HI, Stephen Lee, Federal Way, WA
                  slee@u.washington.edu


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm