[TenTec] Estimating receiver pass

[Jan & Del Seay]

If you want an "End-to-End" test, the proper way is with
a white noise generator fed directly into the microphone
input,and the antenna jack.
Then - all is equal. Anything less is really meaningless.
de KL7HF


Jay A Beamer wrote:
> 
>            ***Message delivered from cc:Mail***
> 
> From:    Jay A Beamer at 4H-MAILC05
> To:      smtp:TenTec@contesting.com
> 
> Date: 10/9/97 12:22PM
> Subject: Re[2]: [TenTec] Estimating receiver passban
> ------------------------------------------------
> 
> Absolutely!
> 
> Jay, KM6VX
> 
> But if one did the experiment bypasing the speaker and microphone, then
> repeated the test with the speaker and microphone (hopefully a quality
> speaker and mic (read, low distortion and good frq resp.) and compared both
> test results and found that the speaker mic. combo had little effect on the
> results then it might make this a non problem?!
> 
> Bill Ames
> KB1LG
>

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm