[TenTec] TT Jones plugs clairified

[Cayman71@aol.com]

Thanks to all for your replies:

Here's more on what they look like:

The plug on the amp looks like this:

   |   |
  _  _ 

It about 3/4 inch square.  Top (verticle) blades are about 3/8 inch apart.
I need a recepticle that will mate with this.


---------------------------------------------------
The recepticle on the PS looks this:

   _  _  _
   _  _  _

It is 5/8 by 1 inch.  All look to accept horizontal blades.  Currently,  the
right-most two positions are shorted.  Removing the jumper disables the power
button on the front.
I need a plug to mate with this.

Thanks again!

Frank KA8SYV
Cayman71@aol.com

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm