[TenTec] Titan Problem

Tyler Stewart k3mm@erols.com
Tue, 3 Mar 1998 00:20:21 -0000

You might not see any significant grid current until you hit 50 or 60 watts
input.  It depends on the loading.  Try hitting it with a little more juice
and see what happens or decrease the loading.

-----Original Message-----
From: Kannegaard <Kannegaard@aol.com>
To: TenTec@contesting.com <TenTec@contesting.com>
Date: Monday, March 02, 1998 05:43
Subject: [TenTec] Titan Problem

>I just acquired a Titan Amplifier with a little problem.  The Grid Current
>always registers zero.  The needle wiggles a little but doesn't indicate any
>significant grid current.  With 10W in from my Paragon, it seems to be
>500 out to a dummy load but no grid current.
>Anyone out there have any ideas on where I should start looking?
>Jon, K6JEK
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm