[TenTec] Voltages on 252 P/S

[Mike Souhrada]

About a month ago I picked up a Triton II w/ the 252 P/S that
I knew did not work. Usually not a big problem. Some of the list
members helped me with manuals and schematics for the P/S and I
already had the Triton manual.
1. Initially no DC output at all.That was a given.

2. I removed the WRONG Q1 pass transistor (was a 2N3055) and
   replaced with a referenced substitute  ECG 181 for the original
   device, a 2N5301. 

3. The SCR 2N5060 was assumed to be defective and replaced.

Now I have a solid  6 VDC??
Neither the "manual" for the 252 or the Triton provide anything beyond
the DC output of 13 VDC @  20 Amps. IE,  no supply device voltages are
given,that's a surprise.
Am I missing some data?? Any ideas on what I should look for next?
The collector of Q1 pass transistor is getting a solid 23.6VDC
scratching my noggin on why no 12VDC??

Tnx for any further info that might help track down the problem.
Mike
Le Claire, Ia

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm