[TenTec] OMNI V Relay - disable?

[Steve Ellington]

There are a couple of approaches to disable the relay in the Omni 5. The
most obvious is to use a pair of vice-grips on the relay, crushing it to
dust then gouge it out and finally chop of it's leads. This method is for
serious cw ops. Otherwise, you will have to lift the collector or emitter
lead of the relay's driver transistor (not easy). I just leave mine set for
the longest delay. At 40 wpm, it only clicks once per transmission anyway.

Steve Ellington
Amateur Radio Operator N4LQ


>Hi, I have a 'new' Omni V and as a QRP type have no need for the clickking
>relay -- especially since the 'shack' is a QRP closet right off the bedroom
>;-)
>
>Can anyone tell me how to disable the relay without major surgery?
>



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm