[TenTec] Re: Marking Mods

Paul Christensen paulc@mediaone.net
Thu, 8 Oct 1998 17:00:20 -0400


Placing the unit's serial number in the owner's manual along with the
modification & maintenance documentation will also help to match the mods to
a specific piece of equipment.

On schematics, I generally make my circuit changes neatly in pencil, then
initial and date the change in a small table on the corner of the page.

-Paul, W9AC

-----Original Message-----
From: Dave Sublette <k4to@meginc.com>
To: Ten Tec Reflector <tentec@contesting.com>
Date: Thursday, October 08, 1998 4:49 PM
Subject: [TenTec] Re: Marking Mods


>
>I think the label on the back panel is a poor idea because over time,
>labels become soiled.  Some even deteriorate until they look bad and as
>an added bonus, won't come off, short of using toxic chemicals.  The
>maintenance log is an excellent idea.  I use a blank side of a page in
>the instruction manual of each piece of my gear that I have modified.
>If I ever sell the gear, the manual, and the modification log goes with
>it.
>
>73,
>
>Dave, K4TO
>
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm