[TenTec] Plate Voltage

[ken k7zum]

its 3100 volts at 230 + line volts, i would suspect that you have a lower
line voltage, if you think that 2900 is low, i took mine down to st. martien
again this year for c.q.w.w. 99 phone, the line voltage at the villa was
205, that's comes out to about 2400 v. on the plates !! lucky to get 900
watts out during the day, in the evening when all the natives would turn the
t.v.'s on, and i was at the end of the line, it would drop to aroung 2100 v.

  but still had lots of fun1

Ken   K7zum........soon to be FS/K7ZUM   again, and that will be of course
with the omni 6 + and the centurion amp again

>
>Hello Everyone,
>  I have a Centurion and the plate voltage is about 2900 volts. Specs
>are 3100. Is this a factory adjust or is that adjustment easily made
>by a novice like myself? If so, how !
>  Too, I got to hear 2 Pegasus' on the SSB net Sunday, both were S7-S9,
>(heard Pegs before but weak signals) and the audio was super. The clarity
>was superb, beautiful reproduction of what sounded to be normal voices.
>No doubt, there is a lot of potential for "filling the envelope" but as
>is, TT has a winner, at least in the audio department.
>
>73  and Thanks
>
>Richard   NW4P
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm