[TenTec] Re: Raspy note on OMNI-6

[Carl Moreschi]

If the power supply is too close to the OMNI VI, it will
make a buzz on transmit.  Try moving the power supply.


Carl Moreschi  N4PY
Franklinton, North Carolina
carlmoreschi@worldnet.att.net

----------
> From: Roy Koeppe <royanjoy@ncn.net>
> To: Ten Tec Reflector <tentec@contesting.com>
> Subject: [TenTec] Re: Raspy note on OMNI-6
> Date: Monday, December 13, 1999 11:42 PM
> 
> 
> About,
> 
> 
> "Out of the blue, my Omni 6 (opt 3) has developed an
> intermittent rasp (buzz) on the trailing edge of cw
> notes.  SSB sig sounds fine.  It's on all bands, with
> all antennas, including a dummy load.  It's audible as
> a hum in the monitor or as a rasp on a second
> receiver.
> 
> Would greatly appreciate any help from knowledgable
> folks out there."
> 
> Best holiday wishes to all & 73,
> Barry  N1EU
> 
> 
> Barry,
> 
> Does the buzz seem to reference to 60 or 120 Hz? If so, that ordinarily
> can only mean it originates in the power supply.
> 
> Good shooting and 73,
> 
> Roy        K6XK
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm