[TenTec] BANDSWITCH PROBLEM

[Roy Minuth - KC8CHR]

Hi Alan,

On my OMNI D I kind have the same problem when switching from one band to
another. Most of the time I just wiggle the switch back and forth a little
and the band will come in great. I don't know if you've ever looked inside
of your OMNI D, but the band switch shaft is connected to a chain that turns
another shaft with the contacts on it. There is a little play in that chain.

73,  --Roy--  KC8CHR

-----Original Message-----
From: ARDUJENSKI@aol.com <ARDUJENSKI@aol.com>
To: TenTec@contesting.com <TenTec@contesting.com>
Date: Sunday, December 26, 1999 12:49 PM
Subject: [TenTec] BANDSWITCH PROBLEM


>
>On my OMNI-D the band selector switch will cause a bit of a problem by not
>making good contact and get then get an intermittant 9.000 on the readout.
Is
>there a simple fix short of replacing the bandswitch?  Alan KB7MBI
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm