[TenTec] Omni-6+ Transmit Indication?
Simmons, Reid W
reid.w.simmons@intel.com
Wed, 10 Feb 1999 10:13:00 -0800
I watch the meter on my Omni VI/3 and my Bird watt meter for an
indication that something is going to the antenna, and I have a field
strength meter to let me know that something is leaving the antenna.
Reid, K7YX
______________________________ Reply Separator
_________________________________
Subject: Re: [TenTec] Omni-6+ Transmit Indication?
Author: "Rosenberg.Eric@orbcomm.com" [SMTP:Rosenberg.Eric@orbcomm.com] at
MSXGATE
Date: 2/10/99 8:57 AM
Someone else suggested this. I tend to look at the frequency display more
than anything else.
Eric
Dave Sublette <k4to@meginc.com> on 10-02-99 11:54:17 AM
To: Eric Rosenberg/OCCVA
cc:
Subject: Re: [TenTec] Omni-6+ Transmit Indication?
Well, you do have the power output meter to look at also.
Rosenberg.Eric@orbcomm.com wrote:
> I just got an Omni-6+ and noticed that the only indication you have that
> you're transmitting is the ALC light near the RF power control.
>
> The Ghiel chip for the Paragon had a nice feature -- it displayed a *
> when you were transmitting.
>
> Is there any way to get that sort of indicator for the Omni-6+?
>
> Thanks,
>
> Eric W3DQ
> Washington, DC
> rosenberg.eric@orbcomm.com
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm