[TenTec] Omni V Filter nomenclature...

[Tom Scott]

My Ten-Tec Omni V has three filters in it that don't seem to bear the 2xx
series model numbers that I find in all the listings of crystal filters,
both at the Ten-Tec factory web site as well as the unofficial Ten-Tec site.
I wonder if someone here can confirm that they are what I expect them to be.

1. In the standard position (not the optional slot) in the 9 MHz IF board
there is an 8 pole filter that is marked: "48058   (OK)   NS   9103". Is
this a model 220 2.4 KHz / 9 MHz filter?

2. In the 2.4KHz  position on the 6.3 MHz Pass Band board there is an 8 pole
filter that is marked: "48074   NS  (and then a number that is very hard to
read, it might be 8640)". Is this indeed a  2.4 KHz / 6.3 MHz filter?  Is
there a 2xx series model number for this filter?

3. Finally, in the 1.8 KHz position on the 6.3 MHz Pass Band board there is
an 8 pole filter that is marked: "48074   NS   8903". Is this indeed a
model 288, 1.8 KHz / 6.3 MHz filter?

Thanks!  Like others here have said, I sure appreciate all the knowledge and
helpfulness in this group! I've only been a subscriber a short time and
already several folks have been very helpful.

- Tom
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
       Tom Scott     -    Wyle Electronics    -    KD7DMH
       10300 SW Nimbus Ave #PB, Portland, OR 97223
       503-603-1931 - TEL   503-684-6620 - FAX
       503-504-1583 - Cell    503-604-8651 - Pager
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm