[TenTec] Omni 6+ TX in/out jumper

[Duane A. Calvin]

Yes, you are doing something wrong.  The amp does not need to be on, but
you need to switch the switch in the lower right hand corner (can't
remember what it's called) -- Standby/Operate (?).  It must be in Standby
for the rig to transmit without the amp on.  Makes sense, but it threw me
at first too when I first got the Centaur.  (My Centurion doesn't work
that way.)

Hope this is useful...

	73,  Duane   AC5AA

On Sun, 17 Jan 1999 00:06:36 -0600 "Robb Urie" <n0ru@neonramp.com>
writes:
>
>Greetings,
>
>While testing the Omni 6+ and Centaur combo, I discovered
>something I found disturbing. It appears that in order for the 
>radio to xmit, you must always have the amp on. In other
>words, the amp, when off, will not complete the path for 
>bare foot operation.
>Am I doing something wrong? The manual does not mention
>this. If this is normal, well I will be most upset.
>Any help would be greatly appreaciated.
>
>Thanks,
>Robb...N0RU
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>

Duane A. Calvin, AC5AA
ac5aa@Juno.com -or- ac5aa@iolusa.com
Day:  dacalvin@us.ibm.com

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm