[TenTec] Omni D tuning problem

[Steve Ellington]

Most likely, the grease in the PTO unit has dried up and a rebuild is
inorder. This is quite a project but the information and supplies are
available from TenTec for around $23 or you can send it to them for
repair.


> 
> The fine tuning knob on my Omni D does not move the larger tuning dial
> behind it. 
> I have to manually turn the larger dial at the same time as I turn the fine
> tuning knob to change the frequency. It seems that some mechanism inside
> the tuning arrangement is not making a good contact.  The radio is a loaner
> from a friend, I am not sure what originally caused this problem.
> 
> Thanks
> 
> Dave - KB9FBG
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
> 
> 

Steve Ellington N4LQ
N4LQ@IGLOU.COM


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm