[TenTec] WD-40
Alan Childress
km4dt@mindspring.com
Sun, 28 Feb 1999 23:47:26 -0500
This is a multi-part message in MIME format.
------=_NextPart_000_001E_01BE6374.B1E9D380
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Here's a repost from rec.antiques.radio+phono that I <KM4DT> think's =
worthwhile:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
WD-40 is a great penetrant and general purpose lubricant. It does have =
a minor undesirable side effect - it leaves a coating of petroleum =
distillate that can be a problem in dusty areas... Dust combined in =
the residue=20
can act like an abrasive - and damage resistance tracks -but then so can =
dust all on it's own... The damage potential of WD-40 is often =
overstated... and doesn't matter much on non precision parts.
On high precision parts - you will void their warranty using WD-40... I =
know Peavey gets a lot of mixers back with noisy slide controls - and =
more often than not - WD-40 is present (and according to Max - one of =
their top mixer guru's occasionally they even get "scented =
Vaseline"!!!). The biggest problem with the newer controls is that the =
heat-laminated carbon traces turn loose if saturated by any penetrant =
-which as noted above - WD-40 is a good one. This is where WD-40's =
"reputation" gets trashed. Once "soaked" by WD-40 - some of=20
these traces get litterally "wiped" off the substrate by the wiper... =
Older controls - of course- weren't "heat laminate" traces - and don't =
have that problem. BTW - Peavey uses Deoxit DN5 for most "routine" =
cleanings/ lubes of controls - nastier ones get Electrowash 2000 =
followed by atreatment of R5 (the industrial strength 2oz. bottled =
treatment from Caig)... And for the really old slide pots - to get that =
"smooth glide"feeling back - a _very_ light coat of white lithium grease =
on the movingparts. But I've got to stress again - we're talking=20
_modern_ pots here... not the old "brute force" stuff of yesteryear...
(Peavey's national service center is just up the street from me - and =
they service an estimated 5 - 6 thousand mixers etc. a year - with an =
average of 50 controls on an average mixer (their larger boards have =
many more - the SRC-6032 has over 540 pots in it) that's over a quarter =
million pots a year! - I think they know a bit about pots!!!!)...just =
.02 worth of observation...
--Randy guttery
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
KM4DT <Alan>
------=_NextPart_000_001E_01BE6374.B1E9D380
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>
<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.72.3110.7"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#b8b8b8>
<DIV><FONT color=3D#000000 size=3D2>Here's a repost from <FONT=20
size=3D2>rec.antiques.radio+phono that I <KM4DT> think's=20
worthwhile:</FONT></FONT></DIV>
<DIV><FONT=20
size=3D2>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT></DIV>
<DIV> </DIV>
<DIV>WD-40 is a great penetrant and general purpose lubricant. It =
does=20
have a minor undesirable side effect - it leaves a coating of petroleum=20
distillate that can be a problem in dusty areas... Dust =
combined in=20
the residue <BR>can act like an abrasive - and damage resistance tracks =
-but=20
then so can dust all on it's own... The damage potential of WD-40 =
is often=20
overstated... and doesn't matter much on non precision parts.</DIV>
<DIV> </DIV>
<DIV>On high precision parts - you will void their warranty using =
WD-40... I=20
know Peavey gets a lot of mixers back with noisy slide controls - and =
more often=20
than not - WD-40 is present (and according to Max - one of their top=20
<B>mixer</B> guru's occasionally they even get "scented=20
Vaseline"!!!). The biggest problem with the newer controls is =
that=20
the heat-laminated carbon traces turn loose if saturated by any =
penetrant -which=20
as noted above - WD-40 is a good one. This is where WD-40's=20
"reputation" gets trashed. Once "soaked" by =
WD-40 -=20
some of <BR>these traces get litterally "wiped" off the =
substrate by=20
the wiper... Older controls - of course- weren't "heat =
laminate"=20
traces - and don't have that problem. BTW - Peavey uses =
<B>Deoxit</B> DN5=20
for most "routine" cleanings/ lubes of controls - nastier ones =
get=20
Electrowash 2000 followed by atreatment of R5 (the industrial strength =
2oz.=20
bottled treatment from Caig)... And for the really old slide pots =
- to get=20
that "smooth glide"feeling back - a _very_ light coat of white =
lithium=20
grease on the movingparts. But I've got to stress again - we're =
talking=20
<BR>_modern_ pots here... not the old "brute force" =
stuff of=20
yesteryear...<BR></DIV>
<DIV>(Peavey's national service center is just up the street from me - =
and they=20
service an estimated 5 - 6 thousand mixers etc. a year - with an average =
of 50=20
controls on an average <B>mixer</B> (their larger boards have many more =
- the=20
SRC-6032 has over 540 pots in it) that's over a quarter million pots a=20
year! - I think they know a bit about pots!!!!)...just .02 worth =
of=20
observation...</DIV>
<DIV> </DIV>
<DIV>--Randy guttery</DIV>
<DIV><FONT color=3D#000000=20
size=3D2>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>KM4DT <Alan></DIV>
<DIV> </DIV></BODY></HTML>
------=_NextPart_000_001E_01BE6374.B1E9D380--
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm