[TenTec] Omni V Mic Drive

[Carter Grabarczyk]

Rick,
Possibly an rfi problem. Leave the Herc out of the picture for a moment,
reproduce the problem running barefoot and then switch to a dummy load
and see if the problem goes away.

73/Carter/K8VT

Rick Williams wrote:
> 
> I was working the ARRL contest today and noticed something odd!  When
> I went to 10 metres and operated barefoot the mic drive required was
> almost full clockwise (approx. 5 o'clock)!  (I usually operate with
> the drive at about 9 o'clock position).  This was the only place I
> could get significant ALC indication and significant SSB output (80 to
> 90 watts).
> 
> When I turned on the Hercules II and transmitted I needed to back the
> drive WAY back to about 10 o'clock.
> 
> I tried the same operation on 12 metres and it behaved in the same
> manner. Fifteen meters and lower frequencies are normal??
> 
> What's happening??
>

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm