[TenTec] model 301 cable

[Dale L. Martin]

Henry,
It's not that critical.

Go to Radio Shack and get a four conductor cable of whatever
length is convenient for your 301 placement at your station.

Try RS part number 278-777, $8.99 for 30 feet, 4-26g with "100%
foil shield and a 75%  overlap of wire braid" (?).  .  -- from my
96 RS catalog....

Or check Home Depot's electrical wire department and see what
they have.

73,
dale, kg5u

-----Original Message-----
From: Henry Mauro <henry@northcoast.com>
To: tentec@contesting.com <tentec@contesting.com>
Date: Monday, October 04, 1999 22:49 PM
Subject: [TenTec] model 301 cable


>
>I purchased a model 301 kit (remote vfo knob in a box for the
Omni 6) a
>while back. I was unable to find suitable cable for it locally.
>According to the instructions on KG5U's web site, it is supposed
to be a
>3-conductor, shielded cable.  I found a 4-conductor cable but it
was too
>large to fit the strain relief provided with the kit, and the
wire
>looked large for the molex connector on the encoder. Anyone have
a part
># and/or source for the right cable?
>
>Henry, W6GZ
>henry@northcoast.com
>
>--
>FAQ on WWW:
http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:
http://www.contesting.com/km9p/search.htm
>
>



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm