[TenTec] Re: Trade: Argonaut 515 for 544 digital....or Sell....

Tim Cook Tim Cook" <timcook@erinet.com
Fri, 7 Apr 2000 19:24:02 -0400


I have had several folks asking to buy the 515 station outright, a few
initial offers to trade, but not many follow-ups, so I am offering it for
$400 + shipping . It includes the 515, 208A CW/Notch filter, all manuals,  a
276  25/100khz calibrator, and a 2.5 amp lambda power supply.  It is
described below, and works as new.
Tim
NZ8J

----- Original Message -----
From: Tim Cook <timcook@erinet.com>
To: tentec <tentec@contesting.com>; QRP <qrp-l@lehigh.edu>
Sent: Monday, April 03, 2000 10:13 PM
Subject: Trade: Argonaut 515 for 544 digital....


> The 515 is 100% electrical, it just came back from the factory for a PTO
> rebuild , dial cord replacement, and general overall tune up. I have the
> factory invoice for $134.89 dated Feb 15, 2000.  All lights work and all
> knobs are original and inserts are unmarked.  The physical condition of
the
> case is about a 7 or 8 out of 10, there are 3 or 4 small nicks in the
paint
> on the top front bezel.  The black slide-on top has some marks , but . you
> have to look close to notice it.   The front panel lettering is perfect.
The
> front panel itself looks like it has some darker spotted areas like
someone
> tried to wax it or something. Again you'd have to look at it just right to
really
> notice it.  I don't want to give the impression it is in bad physical
shape,
> I just want to describe it right.  If someone is really interested, I can
> take some digital pictures and send them.
>
> I also have the model 208A 3-position CW filter (position 1 works super on
> ssb) and Notch filter. It is in nice condition, a couple of small marks.
>
>
> a model 276 xtal calibrator ( has 25/100 khz outputs and
> can be easily modified for use with the 515.)  and a Lambda 2.5 amp power
> supply that I could throw in,

> If you are looking for a mint collector quality radio, this is not the one
> for you, but if you want a nice clean looking, 100% electrical condition
> that works as new, then this is the one you want>
> IF you have something to offer, please let me know
> Thanks
> Tim
> NZ8J
>
>

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm