[TenTec] CORSAIR I (tick,tick,tick...)

[B. J. "Tony" Martin]

Alan,
I have had that happen here when the battery on my battery powered wall clock
gets low.  A new battery cured my problem.  Hope it will work for you.
A few years ago I had the similar problem and upon inspection of my neighbors
electric fence, I found a broken wire that was arcing....I used some insulated
gloves and pliers and "patched" the problem....all was quiet again.
Good Luck
Tony, W4FOA
Chickamauga, GA

ARDUJENSKI@aol.com wrote:

> I was wondering if someone might be able to point out the possible cause
> (source) of the low level ticking I hear in the background on my CORSAIR I.
> It is more noticeable on the lower HF bands (not detectable on 12 and 10M).
> It sounds like the WWV time clicking (about 1 second spacing)and can be as
> much as 1 S-unit. It is not generally noticeable when a signal is present.
> Thank you.   Alan KB7MBI
>
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm