[TenTec] Re: [Logger] Pegasus Problems

[Anthony Bowyer]

Les,
   I had a similar problem. I had a potentiometer with
with one leg grounded and the wiper to line in. I
found that I had to put a resistor in series with the
line connection, I think it was 100k. Seems loading
the line-in causes some stray signals.   

--- Les Warriner <leswa7ham@bentonrea.com> wrote:
> 	OK Gurus, I got a propblem.  Got the Pegasus
> harnessed up to a Yamaha
> Sound Card. Have 1:1 isolation transformers in both
> audio in and audio out
> on the Pegasus. Have a 100:1 pad in the audio in
> cable. Have juggled RF
> power output, microphone in, etc., no change.
> 	Problem:  ALC never goes out!! Reports are that my
> signal is wide.
> Incidentally, my sound card has both line in/out and
> speaker out and am
> using line in/out. Also am using the accessory in on
> the Pegasus, not the
> microphone in.
> 	Anybody got any experience in this Transceiver or
> this problem.  TenTec
> can only say put in a pad which was already in. Then
> they talk ground loop
> even tho both lines are isolated. I'd sure like to
> operate PSK but not
> without an acceptable signal.
> 	Thanks Guys!!!  73
> 
>
------------------------------------------------------------------------
> Unique Valentine gifts, available now at eGroups.
>
http://click.egroups.com/1/1154/1/_/3545/_/949679410/
> 
> 
> eGroups.com home:
> http://www.egroups.com/group/logger
> http://www.egroups.com - Simplifying group
> communications
> 
> 
> 
> 
> 

=====
NT4ZO
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm