[TenTec] AFSK with the Omni 6

[Dale L Martin]

> Greetings,
>
> I'm getting ready to get my RTTY station back on the air.  On my Kenwood
> TS-850 I was able to use the AFSK connector on the rear of the
> rig to accept
> line-level output from my SB-32AWE.  Is the audio input on the rear of the
> Omni 6 line-level or is it "microphone" level?  If the latter,
> I'll need to
> make a circuit to reduce the line-level output of the PC...
>
> 73 de Tom, K4NR
>

What does your manual say?

I opened my manual to page 3-3 and it said:

The rear panel audio input and front panel mic jack are in parallel.  When
operating afsk, make sure the mike is not live.  When operating SSB, make
certain the afsk system is turned off or disconnected.

--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com