[TenTec] Heatsinking and fans....was: Pegasus - horizontal o peration?

[Jim Esser]

I've been following this thread with interest and have implemented all the
improvements on my Argosy II  (Bigger heat sinks, muffin fans, heat sink
compound, switches, etc).

Now my only problem is that I have to turn the rig off every hour or so to
let it defrost so that I can read the display.  I am considering installing
a hair dryer on the Argosy to keep it warm.


Jim Esser, WD9FRF

	-----Original Message-----
	From:	Gerald C Totten [SMTP:gctotten@juno.com]
	Sent:	Thursday, March 16, 2000 8:17 PM
	To:	tentec@contesting.com
	Subject:	Re: [TenTec] Heatsinking and fans....was:  Pegasus -
horizontal operation?



	  I added a small thermal switch rated at 135 deg F. to the heat
sink of
	my CORSAIR II and a small DC fan.  I have noticed that the normally
open
	( N O ) contact only close on long CW transmissions.  I found the
switch
	at AMERICAN SCIENCE AND SURPLUS in Milwaukee WI for $.50 / unit.

	Jerry  K8JRO

	--
	FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
	Submissions:              tentec@contesting.com
	Administrative requests:  tentec-REQUEST@contesting.com
	Problems:                 owner-tentec@contesting.com
	Search:                   http://www.contesting.com/km9p/search.htm

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm