[TenTec] 238 stock status

[Robert]

I wouldn't trade my new 238 for anything!! Well almost new, had it for six 
months....


At 07:51 AM 3/28/00 , Ten-Tec Inc. Amateur Radio Sales wrote:


>Good morning!
>
>I've been reading the reflector mail over the last 24 hours, especially
>the comments re: the 238 antenna tuner.
>
>We are out of stock on the tuner at the moment.  Ten-Tec is
>currently running a two page color advertisement in QST and
>CQ magazines which includes the 238 antenna tuner - this is
>the first time we have advertised the tuner in the ham mags in
>many years.
>
>We had a result from the advertisements that I would not have
>predicted, but in retrospect should have seen coming:  that the
>sales of the tuner spiked higher after the ads appeared.  Which,
>unfortunately for our customers, and for us has left us short on
>available units over the last three months.   We have a 4 week
>backorder at present.
>
>Also wanted to say thanks for all the good PR that owners of our
>equipment have shown here and other places on the Internet.
>It's greatly appreciated.  We read every single message that comes
>through and I can't even count the number of times we've had
>a conversation at Ten-Tec that has begun with "Did you see the
>comment on the reflector about....." - this morning was no exception.
>
>73,
>Scott Robbins, W4PA
>Amateur Radio Product Manager
>
>
>
>
>-----------------------------------------------------------------
>Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
>   Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
>   Repair (865) 428-0364 8-4.  Sales (800) 833-7373 9 am-5:30 pm.
>   Fax (865) 428-4483 24 hrs.  Visit us at <http://www.tentec.com>
>
>   --->--->---> Please note: E-mail <sales@tentec.com> for sales
>   and general product info only.  We presently do not offer
>   repair, parts, or kit building tech support by electronic mail,
>   please telephone (865) 428-0364 or (865) 453-7172.
>
>   Ten-Tec manufactures amateur radio equipment, military and com-
>   mercial use HF radio equipment, custom aluminum and steel
>   enclosures and has an on-premises, fully equipped tool and die
>   facility supplying metal and plastic injection mold industries.
>   Potential tool and die, custom enclosure or communications
>   electronics customer?  Contact us with your needs.
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm

+-------------------------------------------------------+
| 73's  KA5PPX/Robert McAdams/TechPlus/ARRL/10-10 #70957
| H.F. TenTec Omni VI+ HyGain TriBand @ 75'
| http://www.arrl.org Grid locator: EM13lk
|      Lat: 33° 26' 50"n  Lon: 97° 2' 43"w
| http://www.mapblast.com format:
|      Lat: 33.45074  Lon:97.044392
| Dallas Semi Conductor weather site locator:
|      (Select Lake Ray Roberts, Texas)
| http://198.3.123.122/WeatherStation/WeatherApplet.html
+-------------------------------------------------------+

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm