[TenTec] Triton IV Power Connector

[Paul Christensen]

Mike, what you describe sure sounds like a Cinch-Jones connector.  They are
available from Newark and perhaps Mouser or Digi-Key.

The later four-pin Nylon Molex connector and cable is still available from
Ten-Tec.  I recently purchased the complete assembly for my Triton IV and
use it with an Astron switching supply.

-Paul, W9AC

----- Original Message -----
From: "Michael O. Hyder" <N4NT@chartertn.net>
To: <tentec@contesting.com>; "Alan Bryant" <wd0evx@moonworks.com>
Sent: Thursday, October 12, 2000 6:09 AM
Subject: Re: [TenTec] Triton IV Power Connector


>
> Earlier Triton IV's used a six-pin plug with a configuration like this:
> __  __     __
> __  __     __
>
> I want to say they were Amphenol connectors, but really don't remember.
>
> Later Tritons used the 4-pin connector which is still used.
> ----- Original Message -----
> From: "Alan Bryant" <wd0evx@moonworks.com>
> To: <tentec@contesting.com>
> Sent: Wednesday, October 11, 2000 11:38 PM
> Subject: [TenTec] Triton IV Power Connector
>
>
> |
> | Fellow Ten-Techies...
> |
> | Could someone tell me the connector type for the power plug on a Triton
> IV?
> | It's clearly not a Molex, and I need to fashion a cable to an alternate
> | power supply than the 262G I normally use with the radio. I just can't
> seem
> | to find a reference for what this little guy is, and cursory checks of
the
> | usual suppliers here in Denver yields nothing compatible...
> |
> | Thanks in advance for any insights.
> |
> | 73, Alan
>
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com