[TenTec] Quick Omni V Question

Greg Hodsdon k7kj@home.com
Wed, 4 Apr 2001 19:04:03 -0700


Negative on the Paragon comparison, Steve.  The Paragon had both an
RX Offset and TX Offset, although both were adjusted using the vfo
knob. It worked just fine. The lack of a similar arrangement on the Omni
V was the reason I stayed with the Paragon for so many years.
Greg, K7KJ
Portland, OR

----- Original Message -----
From: "Steve Ellington" <n4lq@iglou.com>
To: "Barry N1EU" <n1eu@hotmail.com>; <tentec@contesting.com>
Sent: Wednesday, April 04, 2001 4:56 PM
Subject: Re: [TenTec] Quick Omni V Question


>
> No it does not. It has the usual dual vfos, A/B and they expect you to
first
> establish the qso, hit the = button to sync the vfos then switch to vfo B
> and adjust as if it were the RIT. This works but don't forget to switch
back
> to vfo A after the qso or you will end up transmitting on the wrong
> frequency before long.
> The Paragon has a similar arrangement. The Omni 6 has a real RIT.
> Steve Ellington
> N4LQ
> -----Original Message-----
> From: Barry N1EU <n1eu@hotmail.com>
> To: tentec@contesting.com <tentec@contesting.com>
> Date: Wednesday, April 04, 2001 7:41 PM
> Subject: [TenTec] Quick Omni V Question
>
>
> >
> >Would appreciate knowing whether the Omni V has RIT (aka "Offset
tuning")?
> >
> >Tnx/73,
> >
> >Barry N1EU
> >www.n1eu.com
> >_________________________________________________________________
> >Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >
> >--
> >FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> >Submissions:              tentec@contesting.com
> >Administrative requests:  tentec-REQUEST@contesting.com
> >Problems:                 owner-tentec@contesting.com
> >
> >
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com