[TenTec] QRP for Corsiar?

[James C. Owen, III]

> --- "Dr. Gerald N. Johnson, electrical engineer"
> <geraldj@ames.net> wrote:
> > 
> > Set the ALC for low output, turn down the drive so the ALC
> led
> > only flashes --- I think the unmodified Corsair's (I and II)
> are >expected to reliably go down to 7 or 8 watts.
> > 
> >
 My Corsair II at minimum ALC setting and drive set to just get
an
 indication on the ALC LED has 18-20 watts output. Need to
 change
 the resistor in series with the coarse ALC pot. This is the
 adjustment pot on the SWR board.
 
 73 Jim K4CGY
 


__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35 
a year!  http://personal.mail.yahoo.com/

--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com