[TenTec] Calling Freq

[Richard B Drake]

28,123 might be a problem as that is at the upper edge of the
normal PSK31 segment. But as long as we stay at 123 and up we'll
be OK. Don't go down from there.

----
73, Rich - W3ZJ


> -----Original Message-----
> From: owner-tentec@contesting.com
> [mailto:owner-tentec@contesting.com]On
> Behalf Of hglent
> Sent: Monday, January 22, 2001 20:11 PM
> To: tentec@contesting.com
> Subject: [TenTec] Calling Freq
>
>
>
> Bill suggested these freqs.  So this is what I am
> monitoring.  Let's
> agree real fast and make it official...
>
> These are the calling frequencies!
>
> Paul K.
> WA0BAG
>
>
>
> > I agree.  A calling freq. should be used for that
> only.  Qsy up/down a few
> > kc's for the qso.  A calling Fq. in the novice
> portion of 80/40/15 and 10
> > would be great.  Establishing one for the remaining
> bands would be great.
> > How about the following, for starters:
> > 1,823; 3,723; 7123; 10,123; 14,123; 18,103; 21,123;
> 24,923 adn 28,123 kc's
> > or mHz's.
> >
> > Later.
> > KXBill
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com