[TenTec] OMNI V QRP Mod

Paul Christensen paulc@mediaone.net
Fri, 1 Jun 2001 12:50:15 -0400


>From the "unofficial" Ten-Tec web page at http://www.qsl.net/tentec/

OMNI V QRP Mod
----------------------------------------------------------------------------
----
Mod: Provides a means lowering the power output to QRP levels.

Procedure:

Paul Clinton, Ten-Tec's Service Manager, advises to replace R46 on the 9 MHz
Filter Board from 100K-ohm to10K-ohm @ 1/4 watt. This brings the Omni V's
minimum output level to QRP.

-Paul, W9AC

----- Original Message -----
From: <jlivingo@webtv.net>
To: <tentec@contesting.com>
Sent: Friday, June 01, 2001 8:50 AM
Subject: [TenTec] OMNI V QRP Mod


>
> Folks,  I recently bought an OMNI V with QRP Mod factory installed, but
> with no paperwork re: QRP mod.  Can anyone provide details.  Thanks,
> Jim, K4CFA
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com