[TenTec] Jupiter Computer Control in non-Pegasus Mode

[Carl J. Denbow]

Carl,

Do you know if this is something it would be possible to add in a 
future revision of the firmware?  Also,  I would like to register 
your program.  How do I do that?  Can you accepted an emailed credit 
card number?  Please advise.  Thanks.

Carl

P.S.  I sent you an email about registering your a week or so ago and 
never received a reply.


On Sun, 13 May 2001 00:52:07 +0100, Carl Moreschi wrote:
>The only computer control for the Jupiter is in Pegasus emulation
>mode.
>
>Carl Moreschi  N4PY
>Franklinton, North Carolina
>n4py@earthlink.net
>----- Original Message -----
>From: "Carl J. Denbow" <ka8jxg@callsign.net>
>To: <tentec@contesting.com>
>Sent: Friday, May 11, 2001 10:16 PM
>Subject: Re: [TenTec] Jupiter Computer Control in non-Pegasus Mode
>
>
>>
>> So far I've received two "off-list" responses to this query.  One
>> said it was possible but gave no details.  The other said that in
>> non-Pegasus mode the serial port could only be used for firmware
>> updates.  Would anyone like to go "on-the-record" with a response
>>and
>>
>> enough details to know what codes are used, if this is possible?
>> I've heard that the OMNI rigs use ICOM-compatible codes?  Is this
>> what the Jupiter would use in non-Pegasus mode?   Thanks for any
>> further clarification anyone can give.
>>
>> 73
>>
>> Carl
>>
>> On Thu, 10 May 2001 23:34:26 -0400,  wrote:
>> >Does anyone know if the Jupiter can be computer controlled when 
it
>> >in non-Pegasus mode? That is, will it recognize any commands
>>coming
>> >through the serial port. This would certainly be a nice feature.
>> I've
>> >found that I often like to use the rig with the knobs rather than
>> the
>> >software. At the same time I'd like to have my logging program be
>> >able to "speak" to the Jupiter and also "hear" its frequency
>> >information. Anyone know about this? Thanks.
>> >
>> >Carl
>> >
>>
>> ================================
>> Carl J. Denbow
>> KA8JXG
>> 17 Coventry Lane
>> Athens, Ohio USA
>>
>> EM89
>> Working on WAS and DXCC
>> ================================
>> Message sent from ka8jxg@callsign.net on 05/11/2001
>>
>>
>> --
>> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
>> Submissions:              tentec@contesting.com
>> Administrative requests:  tentec-REQUEST@contesting.com
>> Problems:                 owner-tentec@contesting.com
>>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/tentec
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com


================================
Carl J. Denbow
KA8JXG
17 Coventry Lane
Athens, Ohio USA
 
EM89
Working on WAS and DXCC
================================
Message sent from ka8jxg@callsign.net on 05/13/2001


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com