[TenTec] OMNI VI Power Output

Bob & Linda McGraw K4TAX RMcGraw@InfoAve.Net
Tue, 15 May 2001 21:32:14 -0700


With the Autek meter indication of 50 watts what does the OMNI FWD meter
indicate?  Power meters are notorious for being wrong.

My pair of 3-500Z's drives very nicely to 1400 watts out with 105 watts
of drive from the Omni VI+ on 20M.  Other bands are not quite as
efficient.  Power is measured with a Bird 43 and a 2500H slug feeding a
Bird dummy load.

73
Bob K4TAX

ditzian@alltel.net wrote:
> 
> My Omni VI seems to give a maximum of 50 watts now, on my
> Autek wattmeter, although the factory tuned it a year ago to what
> they said was 100 watts.  At the time I received it back, the Autek
> said 70 watts.
> 
> Putting that together with my very, very old Ameritron  AL-1200, 10
> watts of drive from the Omni gives me 600 watts out, while 50 watts
> of drive gives me 1150 watts out.  I suspect that 100 watts of drive
> would let me exceed the grid current rating quite nicely, but for a
> few seconds I would see the satisfying needle indication of 1500
> watts output.
> 
> To be honest, 100 watts would probably only come just up to the
> grid dissipation, since 50 watts only creates 150 ma. of grid
> current, but the other statement sounds better, doesn't it?
> 
> Anyway, you guys who say that the extra power does not
> meaningfully increase the dBs on the other end are correct, even
> with an amp.  But if you had paid the $1500+ for a new amp with
> pair of 3-500Z tubes, and then find out that it takes two men and
> their girlfriend to drive those tubes, you would understand why you
> want that drive so the needle shows 1500 watts out.
> 
> 73,
> Jan Ditzian
> KX2A
> kx2a@arrl.net
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com