[TenTec] Now I see!

Mike Hyder N4NT@chartertn.net
Tue, 22 May 2001 15:56:54 -0400


Actually the link is
http://www.behringer.de/eng/products/eurorack/mx602a.htm

Mike

----- Original Message -----
From: "Radiodan W7RF" <RFpower@radiodan.com>
To: "George, W5YR" <w5yr@att.net>; "Jack, W7EJJ" <malonej@c2i2.com>
Cc: "Ten-Tec" <tentec@contesting.com>
Sent: Tuesday, May 22, 2001 3:02 AM
Subject: RE: [TenTec] Now I see!


>
> Hi Guys,
>
> After doing a bit more investigation into this little wonder introduced by
> George, I have come across many sites selling it for $99 and at least one
> site offering the whole users manual in .pdf format.
> I was happy to come across a complete manual to make sure it would do what
I
> wanted it to do.
> Here is the link for the MX602A manual, available in many languages.
> http://www.behringer.de/eng/support/manuals/mx602a.htm
>
> Can't wait for mine to arrive and have a better interface for both my Omni
> 6+ and TS-870.
>
> Tnx agn George!
>
> 73, Dan Magro W7RF, (President WARC 1999, member SCDXC, SCCC)
> Manufacturers Rep & Distributor for HENRY RF Power Amplifiers.
> BIRD Power Measuring equipment, Still THE most accurate in the world!
> Tohtsu coaxial relays, Samlex 25A power supply, Maha batteries & chargers
> www.radiodan.com <http://www.radiodan.com/>     RFpower@radiodan.com
> <mailto:RFpower@radiodan.com> A trip to our web site is worth the click!
>
>
>
>
> -----Original Message-----
> From: owner-tentec@contesting.com [mailto:owner-tentec@contesting.com]On
> Behalf Of George, W5YR
> Sent: Monday, May 21, 2001 12:33 PM
> To: Jack, W7EJJ
> Cc: Ten-Tec
> Subject: Re: [TenTec] Now I see!
>
>
>
> Or, do as I do:
>
> All audio in and out of all rigs (3), plus the computer soundcard,
> terminates in a Behringer MX602A Mixer which in turn drives a large stereo
> amplifier and speaker system.
>
> Any mic or receiver or computer audio source can be fed into any radio or
> the soundcard at the twist of a mixer knob. Any audio signal out from any
> radio or the soundcard can be fed to the soundcard and the speaker system
> and headphones. All this with complete level and parametric EQ control of
> every channel.
>
> Although all my audio circuits are single-ended, the Jupiter audio could
be
> readily fed into any of 4 input channels on the mixer which all accept
> blanaced or unbalanced inputs.
>
> The little miracle box costs $99 at any music store that carries recording
> electronics. Mine is absolutely RFI bullet-proof. Distortion and hum are
> non-existent.
>
> 72/73, George  W5YR - the Yellow Rose of Texas QRP-L 1373 NETXQRP 6
> Fairview, TX   30 mi NE of Dallas in Collin county   EM13qe
> Amateur Radio W5YR, in the 55th year and it just keeps getting better!
> Icom IC-756PRO #02121  Kachina #91900556  IC-765 #02437
>
> "Jack, W7EJJ" wrote:
> >
> > Hi William:
> >     The big problem is trying to mix audio with other rigs, I like to
use
> > one speaker for the Jupiter, JRC NRD-545, JRC JST-145 and a ICOM IC-718
> for
> > backup. By having all audio standard it is switchable between rigs. Only
> two
> > radios that I know of that use the balanced ungrounded output is the
> Jupiter
> > and the Drake SW-8. As you can see it is not compatible with most rigs.
> > Otherwise we would have a ham shack full of speakers all working at the
> same
> > time.



--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com